HOB30102601 EZRUN MAX10 SCT ESC, Sensorless Brushless 1/10 SCT.
| Availability: | Out of stock |
What is the box?
- (1) Ezrun MAX10 SCT ESC
- (3) 12 AWG, 200C Black wires for a brushless motor
- (1) Double side tape
- (1) Mounting Plate, 4 screws included
- (2) ZipTies
- (1) Dual Capacitor
- User's manual
- A HOBBYWING decal
++ Important notes +++
"Minimum 70C suggested, lower C rating may be okay, however it will not provide the intended experience. Also, How Power Plugs must be used. The surface area of your plugs, must be "larger" than the wires installed or you will very likely have problems. TRX, "T Plug", EC plugs, and "Deans" are not suggested for today's upgraded electronics setups."
Specification
| MAX8 | MAX10 SCT | MAX10 | |
 |
 |
  |
|
| Scale Vehicles | 1/8th | 1/10th | 1/10th |
| Cont./Peak Current |
150A/950A | 120A/830A | 60A / 450A |
| Motor Mode |
Sensorless
|
|
Sensorless |
| Input | 9-18 Cells NiMH 3-6S Lipo |
6-12 Cells NiMH |
6-9 Cell NiMH 2-3S LiPo |
| Motor Limit | 4S:KV≤3000 6S:KV≤2400 (Motor Size:4274） |
2S LiPo:KV≤6000; 3S LiPo:KV≤4000; 4S LiPo:KV≤3000 (3656 Series of Motors) |
2S LiPo/ 6S NiMH: KV≤6000 3S LiPo/ 9S NiMH: KV≤4000 (3652 size motor) |
| BEC Output | 6V/7.2V adjustable, 6A | 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode) | 6V/7.4V Switchable, Continuous Current of 3A (Switch-mode) |
| Programming Port |
FAN/PRG Port | FAN/PRG Port | FAN/PRG Port |
| Power Connection | N/A | XT90 | XT60 |
| ESC Programming | Same |
|
|
| Switch Mode | Same | Same | Same |
| Capacitor protection |
Yes | Yes | Yes |
| Waterproof | Yes | Yes | Yes |
| Size (L.W.H) mm |
59.8/48/36.8 | 49.0/39.5/34.7 | 39.4/32.8/23 |
| Weight (g) |
173.5g | 105g | 67.8g |